+49 (089) 18 93 668 0 - Info@ScienceServices.de   Our lines are open: Mon - Thu 09:00-17:00, Fri 09:00-15:00

Please find here a comparative table of available conductive silver paints.

The corresponding safety datasheets for the following products can be found here.

Colloidal Compounds and Conductive Adhesives

    • €52.96 €44.50
      €52.96 €44.50
      For the fast painting of instant conductive silver traces, e.g. on REM-samples or circuit boards. Dries in 20-30 minutes at room temperature. The conductive silver ink contains 39-45% silver particles ( approx. 10 microns). The thinner that is used for this pen is Butyl Acetate..
      • Starting at €22.97 €19.30

        Starting at €22.97 €19.30

        Electrodag 1415M shielding lacquer is designed to provide electromagnetic compatibility (EMC). It replaces all discontinued shielding coatings that had contained silver-plated copper and is compatible with plastics commonly used for electronic equipment enclosures. Further it is widely used as conductive lacquer in electron microscopy.
        • €124.00 €104.20
          €124.00 €104.20
          A two component conductive silver epoxy kit that is fast-curing within 15 minutes at 65°C. Sufficient conductivity and mechanical properties for non-critical applications.
          • Starting at €17.85 €15.00

            Starting at €17.85 €15.00

            Silver Conductive Adhesive 478SS is a conductive, silver-based polymer which is used for thick film coatings where liquid silver is not recommended. It offers a very high Tg (glass transition temperature) of 67°C to prevent blocking and offers superior adhesion to polyester film. Adhesive 478SS can be cured at 93°C within 15 minutes.
            • €77.35 €65.00
              €77.35 €65.00
              Silver Conductive Adhesive 503 is liquid, fast drying, high temperature conductive material based on methyl isobuthyl ketone. It is developed for a brought range of different applications, stays flexible and adheres to most substrates.
              • €105.91 €89.00
                €105.91 €89.00
                The acrylic Silver Conductive 18DB70X is a low VOC (Volatile Organic Compounds) coating suitable for EMI (Electromagnetic Interference) and RFI (Radiofrequency Interference) shielding protection. It is a direct substitute for the discontinued Silver Conductive Fluid 416.
                • Starting at €16.18 €13.60

                  Starting at €16.18 €13.60

                  Colloidal Silver Paste is a lacquer based clear, highly viscose conductive formulation. It is ideal for applications where a non-flowing conductive substance is required. The Silver Paste has an average grain size of less than 1 µm and a silver content of 60%. Easily applied with a micro spatula or wooden toothpick.
                  • Starting at €16.18 €13.60

                    Starting at €16.18 €13.60

                    Colloidal Silver Liquid is a fast air-drying formulation on basis of 1-Methoxy-2-propanol used to convert a variety of electrically and thermally non-conductive surfaces to conductive surfaces for many applications. The Silver Liquid has an average grain size of less than 1 µm and a silver content of 60%. A brush attached to the cap is included.

                  In our portfolio you find a variety of conductive liquids and adhesives, such as colloidal compounds from silver, gold or carbon. The available viscosities are from liquid to paste-like, dependent on the colloidal compounds and the base medium used. Depending on your application you may choose from more or less fast curing conductive adhesives in many forms (one/two components, paint- or spray-able, pens with different tips) and their thinners.

                  In case you have any questions regarding our conductive paints and colloidal compounds or you can´t find a product please do not hesitate to contact us: info@scienceservices.de

                  A comparative table of available conductive silver paints you find here.