+49 (089) 18 93 668 0 - Info@ScienceServices.de   We are here for you! Call us or request a call back here.
Language

SEM Specimen Mount

(18)
    • €3.60 €4.28
      Art.Nr: MN75352
      45° and 90° Low Profile FEI, Tescan, Zeiss, Philips, Leo, Cambridge, AMRAY, Leica, CamScan, ETEC
      €3.60 €4.28
      • €52.50 €62.48
        Art.Nr: MN75959-02

        The Gatan 3View systems use special sample pins or sample plates. Serial slicing and BSD imaging are used to generate 3D image data of samples using the pins in SEMs. These sample pins (1.4mm) are particularly suitable for a flat sample area.


        These pins are fully compatible with the Gatan 3View systems; 2 mm pin, 3 mm head with conical tip and total height of 12.5 mm. Manufactured from vacuum compatible aluminum.

        €52.50 €62.48
        • €52.50 €62.48
          Art.Nr: MN75959-04

          Die Gatan 3View Systeme verwenden spezielle Probenstifte bzw. Probenteller. Durch serielles Slicing und BSD-Bildgebung werden mittels der Stifte in REMs 3D-Bilddaten von Probenzu erzeugt. Diese Probenstifte (1,4mm) eignen sich besonders bei einem flachen Probenbereich.


          Diese Stifte sind vollständig kompatibel mit den Gatan 3View Systemen; 2 mm Stift, 3 mm Kopf mit konischer Spitze und Gesamthöhe von 12,5 mm. Gefertigt aus vakuumtauglichem Aluminium.

          €52.50 €62.48
          • €86.80 €103.29
            Art.Nr: GSEMF1-Ni
            100 Radial sectors are easily identified by reference to decimal number in the annular rim and alphabet letters in the four quadrants.
            €86.80 €103.29
            • €80.50 €95.80
              Art.Nr: GSEMF1-Cu
              100 Radial sectors are easily identified by reference to decimal number in the annular rim and alphabet letters in the four quadrants.
              €80.50 €95.80
              • €86.80 €103.29
                Art.Nr: GSEMF2-Ni
                The new SEMF2 allows for easy characterization and analysis of particles and suspension. The larger cells are identified using numbers from 1 to 57.
                €86.80 €103.29
                • €80.50 €95.80
                  Art.Nr: GSEMF2-Cu
                  The new SEMF2 allows for easy characterization and analysis of particles and suspension. The larger cells are identified using numbers from 1 to 57.
                  €80.50 €95.80
                  • €86.80 €103.29
                    Art.Nr: GSEMF3-Ni
                    The new SEMF3 uses an alpha-numeric index, allowing up to 25 predetermined specimens to be fixed and then located in a SEM. The large asymmetric cut-out feature in the rim enables the right view to be easily obtained when placing on a SEM stub.
                    €86.80 €103.29
                    • €80.50 €95.80
                      Art.Nr: GSEMF3-Cu
                      The new SEMF3 uses an alpha-numeric index, allowing up to 25 predetermined specimens to be fixed and then located in a SEM. The large asymmetric cut-out feature in the rim enables the right view to be easily obtained when placing on a SEM stub.
                      €80.50 €95.80
                      • €264.10 €314.28
                        Art.Nr: E75950-01
                        A single set screw loading vise for fast and easy to hold specimens for SEM. The jaws are 25mm long, 11mm wide and 8mm high. 3.1mm pin.
                        €264.10 €314.28
                        • €139.00 €165.41
                          Art.Nr: E75945-05
                          Accommodates five 10mm diameter specimen stubs, with 3.1mm diameter pin.
                          €139.00 €165.41
                          • Art.Nr: MN75944-04
                            It accommodates four pin type, up to 12.5 surface specimen stubs, with 3.1mm diameter pin.
                            • €1,046.50 €1,245.34
                              Art.Nr: E75930
                              For your convenience we now carry a SEM Sample Holder Set to fill all of your needs. The set consists of one universal holder, one vertical mount holder for thin samples, one 3-pin and one 5-pin configuration holder with a key for the set screw all in a finely finished wood box. Please specify the base requirement for your instrument when ordering. Delivery time on this item is approximately 2 weeks.
                              €1,046.50 €1,245.34
                              • €75.50 €89.85
                                Art.Nr: E75925
                                It is 10mm in diameter, 5mm high, copper sample holder to fit in the first stage of the ISI DS 130 and 150 SEM's. The inner cylinder is height adjustable so that you can adjust the sample to the correct working distance.
                                €75.50 €89.85
                                • €402.50 €478.98
                                  Art.Nr: E75186
                                  Made from ultra-pure aluminium. Lathe finish.
                                  €402.50 €478.98
                                  • €163.70 €194.80
                                    Art.Nr: GSEMF3-Au
                                    The new SEMF3 uses an alpha-numeric index, allowing up to 25 predetermined specimens to be fixed and then located in a SEM. The large asymmetric cut-out feature in the rim enables the right view to be easily obtained when placing on a SEM stub.
                                    €163.70 €194.80
                                    • €163.70 €194.80
                                      Art.Nr: GSEMF2-Au
                                      The new SEMF2 allows for easy characterization and analysis of particles and suspension. The larger cells are identified using numbers from 1 to 57.
                                      €163.70 €194.80
                                      • €163.70 €194.80
                                        Art.Nr: GSEMF1-Au
                                        100 Radial sectors are easily identified by reference to decimal number in the annular rim and alphabet letters in the four quadrants.
                                        €163.70 €194.80