Englisch 
Deutsch 
Embedding Molds
(22)
-
Starting at €150.20 €178.74
The Seal'N Freeze® Box and the Cryotray® Embedding Molds are designed for the cryogenic freezing (snap or flash freezing) of histological tissue samples, primarily for use in cryostat sectioning. The Cryotray® consists of 4 cryomolds designed for batch processing of multiple samples and storage protection. The Seal'N Freeze® Box allow optimal temperature for freezing of tissue samples in OCT Compound using liquid nitrogen or dry ice with ethanol.Starting at €150.20 €178.74
-
Starting at €30.00 €35.70
These reusable embedding molds have round cavities available in three diameters of 10, 12.5 or 17.5 mm. They are made from blue silicone. For better traceability, cavities are numbered.
Starting at €30.00 €35.70
-
€32.00 €38.08Art.Nr: G69934-8ASet of one body and one row of cone caps. Body diameter is 8mm. Head is 2mm. Body (G69934-8B) and cone cap base (G69934-8C) are also available individually. A cone cap base can be used as air tight seal as well.
***Ask for Samples***
€32.00 €38.08 -
€16.00 €19.04Art.Nr: G69934-8C
The five interconnected conical caps form the basis of the embedding mold. Diameter of the head: 2mm.
***Ask for Samples***
€16.00 €19.04 -
€16.00 €19.04Art.Nr: G69934-8B
Each body piece consists of 5 numbered cavities, each with a diameter of 8mm. This body part plus the cone cap base (G69934-8C) give one row of 5 embedding molds.
***Ask for Samples***
€16.00 €19.04 -
€42.00 €49.98Art.Nr: E70907This Mold produces blocks of the best dimension to be held securely by Reichert/Leica Ultracut stepped microtome chucks. Cavities 15mmx 7mm x 4mm.€42.00 €49.98 -
€27.30 €32.49Art.Nr: E70903This mold produces 12 small embedding blocks with tapered ends.€27.30 €32.49 -
€38.20 €45.46Art.Nr: E70875A new design with 10 triple numbered, tapered tip cavities to save you time and handling.€38.20 €45.46 -
€29.10 €34.63Art.Nr: E70870-CBNo more stickiness - with this Cocoon storage box Acrylic resins are no longer a challenge for flat embedding.€29.10 €34.63 -
€23.70 €28.20Art.Nr: E70870A standard flat embedding mold where both ends are tapered. This enables you to embed specimens in both ends of each casting.€23.70 €28.20 -
€41.00 €48.79Art.Nr: E70172The same design as above E70170 but with the addition of three round cavities which are 17mm in diameter and 1mm deep€41.00 €48.79 -
€41.90 €49.86Art.Nr: E70170Uses a 1x25,4cm glass slide as a base, and duplicates the slide using the resin of your choice.€41.90 €49.86 -
€56.40 €67.12Art.Nr: E70167This mold is designed primarily for embedding cell culture specimens grown either directly on the bottom of a dish or on the filter when cross sections of the cells are needed.€56.40 €67.12 -
€56.40 €67.12Art.Nr: E70166This mold accommodates longer pieces of tissues (muscle, skin biopsies, and many plant specimens)€56.40 €67.12 -
€56.40 €67.12Art.Nr: E70165This 24 cavity mold produces a block similar to the embedding capsule block.€56.40 €67.12 -
€45.50 €54.15Art.Nr: E70161This molds are made from the strongest possible silicone rubber providing extremely high tear resistance. They are all reusable. Type C: 12 cavities cylindrical shapes, 8mm diameter 16mm height, flat tips.€45.50 €54.15 -
€45.50 €54.15Art.Nr: E70160Our molds are made from the strongest possible silicone rubber providing extremely high tear resistance. They are all reusable. Type B: 12 cavities, 8mm diameterbody, 5mm diameter tip 16mm height, tapered tips.€45.50 €54.15 -
€38.20 €45.46Art.Nr: E70150This molds are made from the strongest possible silicone rubber providing extremely high tear resistance. They are all reusable. Type A: 10 cavities, 8mm diameter body, 5mm diameter tip, 11mm height, tapered tip€38.20 €45.46 -
€247.20 €294.17Art.Nr: E70143-RThis mold offers flat embedding for most resins, including LR White®, LR Gold®, JB-4, Immuno-Bed and Lowicryl®.€247.20 €294.17
-
€308.90 €367.59Art.Nr: E70143This mold offers flat embedding for most resins, including LR White®, LR Gold®, JB-4, Immuno-Bed and Lowicryl®.€308.90 €367.59
-
€165.10 €196.47Art.Nr: E70021Polyethylene embedding capsules with flat bottom. Inner diameter 8mm.€165.10 €196.47 -
€34.90 €41.53Art.Nr: CASP-369Green silicone rubber mold. Round shape for very large sections (diameter 92mm).€34.90 €41.53
