Wafer & Flat Tweezers

Dumont Wafer Tweezers. Tip measures: A: 0,2mm B: 7,0mm. Length: 120mm

Dumont Wafer Tweezers with flat, rounded paddels. Tip measures: A: 0,15mm B: 7,00mm. Length: 120mm

Rubis Wafer Tweezer without teeth.

Rubis Wafer Tweezers with 4 teeth. Lower part perforated.

Rubis Wafer Tweezers with 2 teeth. Flat lower paddle.

Rubis Wafer Tweezers with 5 teeth. Flat lower paddle.

Rubis Wafer Tweezers with 6 teeth. Step up lower paddle.

Clean-room compatible Rubis Wafer Tweezers. Tips are made of ESD safe PEEK.

Clean-room compatible Rubis Wafer Tweezers. Tips are made of ESD safe PEEK.

Rubis Wafer Tweezers with 10 teeth. Flat lower paddle with opening controller.

Acid resistant, extra long, with line up pin. 165 mm long.

Acid resistant, 165 mm long.

Smooth and wide tips, good for handling delicate parts. Tip 6,3mm wide. Length 120mm.

Smooth, wide and upward bent tips. Good for handling delicate parts. Tip 6,2mm wide. Length 120mm.

EMS Wafer Tweezers. A: 6.5mm; B: 5.0mm; C: 2.5mm; D: 4.0mm (see fig.)

Replacement Tips for Wafer Tweezers E78410-2WFR

EMS Wafer Tweezers with 3 teeth.Tips are made of ESD safe PEEK/CF30 and offer gently holding wafers. Replacement tips are available. A: 6,6mm; B: 2,0mm; C: 2,0mm; D: 3,5mm; E: 4,5mm (see fig.)

EMS Wafer Tweezers with a extra long lower paddle. A: 12,0mm; B: 13,0mm; D: 2,5mm (see fig.)

EMS Wafer Tweezers with a split lower paddle for minimal contact. A: 29,0mm; B: 5,5mm; D: 3,0mm (see fig.)

EMS Wafer Tweezers with narrow paddels. A: 7,8mm; B: 6,0mm; E: 6,0mm (see fig.)

EMS Wafer Tweezers with 3 teeth. Lower part perforated. A: 9,5mm; B: 11,0mm; D: 4,0mm; E: 2,5mm (see fig.)

EMS Wafer Tweezers with 3 teeth. A: 9,5mm; B: 10,0mm; C: 2,5mm; D: 4,0mm; E: 2,5mm (see fig.)

EMS Wafer Tweezers with 3 teeth. Lower part perforated. A: 6,5mm; B: 8,5mm; D: 5,5mm; E: 2,4mm (see fig.)

EMS Wafer Tweezers with 3 teeth. Lower part perforated. A: 9,5mm; B: 8,5mm; D: 5,5mm; E: 2,4mm (see fig.)

EMS Wafer Tweezers. Flat lower paddle with open area. A: 28,0mm; B: 12,0mm; D: 5,0mm; E: 5,0mm (see fig.)

EMS Wafer Tweezers with 3 teeth. A: 9,5mm; B: 8,5mm; D: 3,5mm; E: 2,5mm (see fig.)

EMS Wafer Tweezers with 4 teeth. A: 12,0mm; B: 8,5mm; D: 3,5mm; E: 2,5mm (see fig.)

EMS Wafer Tweezers with 4 teeth. A: 12,0mm; B: 9,0mm; D: 4,0mm; E: 2,5mm (see fig.)