Hybridization & Incubation Chambers

Reusable CultureWell™ gaskets from CultureWell™ Chambered Coverglass and CultureWell™ Chamber Coverglass Inserts are available bulk packaged.

Each CultureWell™ insert is comprised of four chambered coverglass assembled in a disposable frame which is placed in a standard 86 mm x 128 mm culture plate.  All are sterile and ready to use.

Chambered coverglass products are optimal for high resolution microscopy.

SecureSeal™ hybridization chambers provide optimum surface to volume fluid dynamics. They have 1,5mm diameter Ports and come with 120 Port Seals.

SecureSeal™ hybridization chambers provide optimum surface to volume fluid dynamics. They have 1,5mm diameter Ports and come with 120 Port Seals.

SecureSeal™ hybridization chambers provide optimum surface to volume fluid dynamics. They have 1,5mm diameter Ports and come with 120 Port Seals.

SecureSeal™ hybridization chambers provide optimum surface to volume fluid dynamics. They have 1,5mm diameter Ports and come with 120 Port Seals.

SecureSeal™ imaging spacers are ultra thin adhesive spacers which peel and stick to coverglass or microscope slides to confine specimens without the need for compression.

"Press-to-Seal" covers form water-tight, multiwall cell incubation or cytochemistry chamber when pressed to coverslips or microscope slides. Reagents can be quickly added and removed through dual access ports (1.5mm Dia) without disturbing or cross-contaminating specimens in adjacent wells.

"Press-to-Seal" covers form water-tight, multiwall cell incubation or cytochemistry chamber when pressed to coverslips or microscope slides. Reagents can be quickly added and removed through dual access ports (1.5mm Dia) without disturbing or cross-contaminating specimens in adjacent wells.

"Press-to-Seal" covers form water-tight, multiwall cell incubation or cytochemistry chamber when pressed to coverslips or microscope slides. Reagents can be quickly added and removed through dual access ports (1.5mm Dia) without disturbing or cross-contaminating specimens in adjacent wells.

"Press-to-Seal" covers form water-tight, multiwall cell incubation or cytochemistry chamber when pressed to coverslips or microscope slides. Reagents can be quickly added and removed through dual access ports (1.5mm Dia) without disturbing or cross-contaminating specimens in adjacent wells.

Isolate specimens using press-to-seal silicone isolators with removable hydrophobic barriers. Adhesive (A) / Adhesive (A) – press-to-seal adhesive on both sides.

Isolate specimens using press-to-seal silicone isolators with removable hydrophobic barriers. Silicone (S) / Adhesive (A) – press-to-seal silicone on one side and adhesive on the other side.

Isolate specimens using press-to-seal silicone isolators with removable hydrophobic barriers. Silicone (S) / Silicone (S) – press-to-seal silicone gasket only, no adhesive. They are autoclavable and reuseable.

Isolate specimens using press-to-seal silicone isolators with removable hydrophobic barriers. Adhesive (A) / Adhesive (A) – press-to-seal adhesive on both sides.

Isolate specimens using press-to-seal silicone isolators with removable hydrophobic barriers. Silicone (S) / Adhesive (A) – press-to-seal silicone on one side and adhesive on the other side.

Isolate specimens using press-to-seal silicone isolators with removable hydrophobic barriers. Silicone (S) / Silicone (S) – press-to-seal silicone gasket only, no adhesive. They are autoclavable and reuseable.

Isolate specimens using press-to-seal silicone isolators with removable hydrophobic barriers. Adhesive (A) / Adhesive (A) – press-to-seal adhesive on both sides.

Isolate specimens using press-to-seal silicone isolators with removable hydrophobic barriers. Silicone (S) / Adhesive (A) – press-to-seal silicone on one side and adhesive on the other side.

Isolate specimens using press-to-seal silicone isolators with removable hydrophobic barriers. Silicone (S) / Silicone (S) – press-to-seal silicone gasket only, no adhesive. They are autoclavable and reuseable.

Isolate specimens using press-to-seal silicone isolators with removable hydrophobic barriers. Adhesive (A) / Adhesive (A) – press-to-seal adhesive on both sides.

Isolate specimens using press-to-seal silicone isolators with removable hydrophobic barriers. Silicone (S) / Adhesive (A) – press-to-seal silicone on one side and adhesive on the other side.

Isolate specimens using press-to-seal silicone isolators with removable hydrophobic barriers. Silicone (S) / Silicone (S) – press-to-seal silicone gasket only, no adhesive. They are autoclavable and reuseable.