SEM Specimen Mount
(57)-
€3.60 €4.28Art.Nr: MN7535245° and 90° Low Profile FEI, Tescan, Zeiss, Philips, Leo, Cambridge, AMRAY, Leica, CamScan, ETEC€3.60 €4.28
-
€52.50 €62.48Art.Nr: MN75959-02
The Gatan 3View systems use special sample pins or sample plates. Serial slicing and BSD imaging are used to generate 3D image data of samples using the pins in SEMs. These sample pins (1.4mm) are particularly suitable for a flat sample area.
These pins are fully compatible with the Gatan 3View systems; 2 mm pin, 3 mm head with conical tip and total height of 12.5 mm. Manufactured from vacuum compatible aluminum.
€52.50 €62.48 -
€52.50 €62.48Art.Nr: MN75959-04
Die Gatan 3View Systeme verwenden spezielle Probenstifte bzw. Probenteller. Durch serielles Slicing und BSD-Bildgebung werden mittels der Stifte in REMs 3D-Bilddaten von Probenzu erzeugt. Diese Probenstifte (1,4mm) eignen sich besonders bei einem flachen Probenbereich.
Diese Stifte sind vollständig kompatibel mit den Gatan 3View Systemen; 2 mm Stift, 3 mm Kopf mit konischer Spitze und Gesamthöhe von 12,5 mm. Gefertigt aus vakuumtauglichem Aluminium.
€52.50 €62.48 -
Art.Nr: MN12-000279
-
Starting at€3.40 €4.05
Made from pure aluminium. Lathe finish.Starting at €3.40 €4.05
-
Starting at
Low Profile Fortress™ FIB Holder to hold either a standard FIB lift out specimen on a grid or an H-Bar cut Sample. Securely holds the Fortress™ Low/High Profile holder under a stereomicroscope and permits viewing from 2 angles without changing focus on the microscope.Starting at
-
Starting at€99.30 €118.17
Ideal for examination cross section of thin samples, such as wafers, multi-layer of capacitors, plastics, metals, etc. For most AMRAY: 12,7mm diameter , 3.1mm dia. pin 3.1mm with split openings up to 6.4mm. Pin height: 8mm, 15mm.Starting at €99.30 €118.17
-
Starting at
Made from aluminium, used to adapt 3,1mm pin diameter SEM stubs.Starting at
-
Starting at€198.80 €236.57
The Multi Pin Holder ist designed to save time. It accommodates 5 Specimen holders with 12,5mm surface and 3,1mm pin.Starting at €198.80 €236.57
-
Starting at€170.70 €203.13
The Multi Pin Holder ist designed to save time. It accommodates 3 Specimen holders with 12,5mm surface and 3,1mm pin.Starting at €170.70 €203.13
-
Starting at€393.90 €468.74
This holder is designed to hold thin samples vertically in the SEM or any microscope. It is 25mm in diameter and 10mm thick. Each of the two loader jaws can hold up to 3mm thick samples.Starting at €393.90 €468.74
-
Starting at€505.20 €601.19
This holder will hold almost any sample from 3mm to 29mm in diameter plus various odd shaped samples, which one of their dimensions is not greater than 29mm.Starting at €505.20 €601.19
-
Starting at€185.70 €220.98
Vitreous Carbon Substrate. Surface polish to 1µm glassy finish.Starting at €185.70 €220.98
-
Starting at €13.40 €15.95
-
Starting at€58.20 €69.26
Made from ultra-pure aluminium. Lathe finish. With or without pin.Starting at €58.20 €69.26
-
Starting at€65.50 €77.95
Made from ultra-pure aluminium. Lathe finish.Starting at €65.50 €77.95
-
Starting at€50.10 €59.62
Made from ultra-pure aluminium. Lathe finish. Pin Length: 5mm.Starting at €50.10 €59.62
-
Starting at€66.40 €79.02
Made from ultra-pure aluminium. Lathe finish.Starting at €66.40 €79.02
-
Starting at
Made from ultra-pure aluminium. Lathe finish. Two different heights available.Starting at
-
Starting at€49.30 €58.67
Made from ultra-pure aluminium. Lathe finish. Also available from spectroscopically pure carbon and in two different heights.Starting at €49.30 €58.67
-
Starting at€43.70 €52.00
Made from ultra-pure aluminium. Lathe finish. Also available from spectroscopically pure carbon and in two different heights.Starting at €43.70 €52.00
-
Starting at€13.70 €16.30
Made from ultra-pure aluminium. Lathe finish. Also available from spectroscopically pure carbon.Starting at €13.70 €16.30
-
Starting at
Made from ultra-pure aluminium. Lathe finish. Available in different diameters.Starting at
-
Starting at€25.50 €30.35
Made from ultra-pure aluminium. Lathe finish.Starting at €25.50 €30.35
-
Starting at€23.20 €27.61
Made from ultra-pure aluminium. Lathe finish. Available in different diameters.Starting at €23.20 €27.61
-
Starting at€54.60 €64.97
Made from ultra-pure aluminium. Lathe finish.Starting at €54.60 €64.97
-
Starting at
Made from ultra-pure aluminium. Lathe finish. Also available from spectroscopically pure carbon.Starting at
-
Starting at
Made from ultra-pure aluminium. Lathe finish. Available in different diameters.Starting at
-
Starting at
Made from ultra-pure aluminium. Lathe finish. Available in different diameters.Starting at
-
Starting at€21.80 €25.94
Made from ultra-pure aluminium. Polished finish: A cloth polished finish which produces a smooth and luster surface. Also available from spectroscopically pure carbon.Starting at €21.80 €25.94